Community discussions

MikroTik App
 
markwien
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 69
Joined: Sun Jul 22, 2018 10:49 am

CRS354-48G-4S+2Q+ unable to switch to switchos

Thu Mar 12, 2020 2:44 pm

Hi Mikrotik

I bought a new CRS354-48G-4S+2Q+ and tried to switch to switchos without any success:
[admin@MikroTik] > /system swos upgrade      
error - contact MikroTik support and send a supout file (2)
[admin@MikroTik] > /system swos export       
# mar/12/2020 13:42:11 by RouterOS 6.45.8
# software id = GE9V-YANB
#
# model = CRS354-48G-4S+2Q+
# serial number = B8450B9A2FA4
#error exporting /system swos


if i set to boot to switchos --> after reboot i can not connect and ports are not flashing ....



Have i recieved a bricket switch?
 
User avatar
JohnTRIVOLTA
Member
Member
Posts: 343
Joined: Sun Dec 25, 2016 2:05 pm
Location: BG/Sofia

Re: CRS354-48G-4S+2Q+ unable to switch to switchos

Thu Mar 12, 2020 2:54 pm

This switch model have only ROS installed for now ! Maybe in future will be added and SWOS too !
 
planetcoop
Member Candidate
Member Candidate
Posts: 140
Joined: Thu May 15, 2014 2:32 pm
Location: Sacramento, CA

Re: CRS354-48G-4S+2Q+ unable to switch to switchos

Thu Mar 12, 2020 5:16 pm

I have run into this issue too. you should be able to console the switch and configure it to boot RouterOS again as i have. It should then boot. Also interestingly, i was not able to netinstall a different version of RouterOS. I think the switch is new and needs a bit of software work yet.
 
martinclaro
Frequent Visitor
Frequent Visitor
Posts: 95
Joined: Sat Sep 28, 2013 6:08 am
Location: Buenos Aires, Argentina
Contact:

Re: CRS354-48G-4S+2Q+ unable to switch to switchos

Thu Mar 12, 2020 10:35 pm

Did you try with the following command?
  /system routerboard settings set boot-os=swos
 
markwien
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 69
Joined: Sun Jul 22, 2018 10:49 am

Re: CRS354-48G-4S+2Q+ unable to switch to switchos

Mon Mar 16, 2020 11:52 am

dear all

i got response from mikrotik support. They currently NOT SUPPORT SwitchOS on this device.

it might never come. its ok to use routerOS for switching... I wish that it get better communicated even quick start manual shipped with the switch is telling how to boot to switchOS...

br

Mark
 
amjadayub
just joined
Posts: 12
Joined: Sat Feb 16, 2019 7:52 am

Re: CRS354-48G-4S+2Q+ unable to switch to switchos

Thu May 06, 2021 5:25 pm

sw os released for CRS354. upgrade your routeros to testing version. then run following command
/system swos upgrade
after this go here
System >> RouterBoard >> set boot to SwOS

Done

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], BrianTax, coreshock, freemannnn and 63 guests