I have followed the guide here;
https://wiki.mikrotik.com/wiki/Manual:Switch_Router
In order to set up two VLANs on my RB2011.
I have confirmed that a host will get the right IP from the DHCP server for the VLAN it should be on.
However that same host is not able to ping its Gateway, and therefore get out to the internet.
Any ideas would be great
Current config (minus sensitive info )
Sorry if formatting is poor,
# jun/22/2020 20:03:50 by RouterOS 6.46.6
# software id = RSMW-YDSZ
#
# model = RB2011UiAS-2HnD
# serial number = B9090B80C4B6
/interface bridge
add admin-mac=C4:AD:34:2D:4C:CE auto-mac=no comment=defconf name=Home
add name=Lab
/interface ethernet
set [ find default-name=ether1 ] advertise=10M-full,100M-full,1000M-full
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX country="united kingdom" disabled=no distance=indoors frequency=auto installation=indoor mode=ap-bridge ssid="Stay off" wireless-protocol=802.11
/interface vlan
add interface=Lab name=VLAN10_Desktop vlan-id=10
add interface=Lab name=VLAN20_Server vlan-id=20
/interface ethernet switch
set 0 name=Home
set 1 name=Lab
/interface ethernet switch port
set 6 default-vlan-id=20 vlan-header=always-strip vlan-mode=secure
set 7 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 8 default-vlan-id=20 vlan-header=always-strip vlan-mode=secure
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.88.2-192.168.88.254
add name=POOlab ranges=192.168.100.100-192.168.100.200,192.168.50.2-192.168.50.254
add name="Pool VLAN50" ranges=192.168.50.2-192.168.50.254
add name=POOL10 ranges=192.168.10.100-192.168.10.200
add name=POOL20 ranges=192.168.20.100-192.168.20.200
/ip dhcp-server
add address-pool=dhcp disabled=no interface=Home name=defconf
add address-pool=POOlab disabled=no interface=Lab name=DHCPlab
add address-pool=POOL10 disabled=no interface=VLAN10_Desktop name=DHCP10
add address-pool=POOL20 disabled=no interface=VLAN20_Server name=DHCP20
/interface bridge port
add bridge=Home comment=defconf interface=ether2
add bridge=Home comment=defconf interface=ether3
add bridge=Home comment=defconf interface=ether4
add bridge=Home comment=defconf interface=ether5
add bridge=Lab comment=defconf interface=ether6
add bridge=Lab comment=defconf interface=ether7
add bridge=Lab comment=defconf interface=ether8
add bridge=Lab comment=defconf interface=ether9
add bridge=Lab comment=defconf interface=ether10
add bridge=Home comment=defconf interface=sfp1
add bridge=Lab comment=defconf interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface ethernet switch vlan
add ports=ether7,Lab-cpu switch=Lab vlan-id=10
add ports=ether8,Lab-cpu,ether6 switch=Lab vlan-id=20
/interface list member
add comment=defconf interface=Home list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=Lab list=LAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether2 network=192.168.88.0
add address=192.168.100.1/24 interface=Lab network=192.168.100.0
add address=192.168.1.137/24 interface=ether1 network=192.168.1.0
add address=192.168.10.1/24 interface=VLAN10_Desktop network=192.168.10.0
add address=192.168.20.1/24 interface=VLAN20_Server network=192.168.20.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.10.0/24 dns-server=8.8.8.8 gateway=192.168.10.1
add address=192.168.20.0/24 dns-server=8.8.8.8 gateway=192.168.20.1
add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8,8.8.4.4 gateway=192.168.88.1 netmask=24
add address=192.168.100.0/24 dns-server=8.8.8.8,8.8.4.4 gateway=192.168.100.1 netmask=24
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=input comment="Custom: Lab Gateway isolation" disabled=yes dst-address=192.168.100.1 in-interface=Home log=yes
add action=drop chain=input disabled=yes dst-address=192.168.88.1 in-interface=Lab log=yes
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
add action=accept chain=forward comment="lab exception" disabled=yes dst-address=192.168.100.1 src-address=192.168.100.0/24
add action=drop chain=forward comment="Custom: Lab Isolation" disabled=yes dst-address=192.168.100.0/24 src-address=192.168.88.0/24
add action=drop chain=forward disabled=yes dst-address=192.168.88.0/24 log=yes src-address=192.168.100.0/24
add action=drop chain=forward disabled=yes dst-address=192.168.100.0/24 log=yes src-address=192.168.100.0/24
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN
add action=masquerade chain=srcnat out-interface=ether1
/ip route
add distance=1 gateway=192.168.1.254
/system clock
set time-zone-name=Europe/London
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN