Page 1 of 1

System Health CCR1072 vs CCR1036

Posted: Sat Jun 27, 2020 10:54 pm
by Guscht
Hi, we'd like to monitor the CPU- and Board-Temperatures.

The CCR1036 provide full OID-support, but the 1072 only two OIDs:

CCR1072:
1072.jpg
CCR1036:
1036.jpg
Any chance to get the Board-Temperatures from the CCR1072 via SNMP in a further update?

Re: System Health CCR1072 vs CCR1036

Posted: Mon Jun 29, 2020 7:34 pm
by Guscht
As expected, neither help from the 'great' community nor Mikrotik... :(

But I share my knowledge. For the CCR1072, here are the OIDs:

CPU-Temperature: 1.3.6.1.4.1.14988.1.1.3.100.1.3.17
Board-Temperature 1: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7101
Board Temperature 2: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7102
Fan 1 Speed: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7001
Fan 2 Speed: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7002
Fan 3 Speed: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7003
Fan 4 Speed: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7004
Power Consumption: 1.3.6.1.4.1.14988.1.1.3.100.1.3.16
PSU1 Voltage: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7201
PSU1 Current: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7301
PSU2 Voltage: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7202
PSU2 Current: 1.3.6.1.4.1.14988.1.1.3.100.1.3.7302

Re: System Health CCR1072 vs CCR1036

Posted: Tue Apr 25, 2023 3:24 am
by andyhenckel
Thank you!!!
I've updated the dude with probes, to monitor the voltage, which also reports the solar array performance and functionality.
Mikrotik Dude-Volt Probe - PSU1-PSU2.jpg