Community discussions

MikroTik App
 
User avatar
wynandZA
just joined
Topic Author
Posts: 6
Joined: Thu Aug 06, 2020 8:06 pm
Location: Cape Town

route to CPE

Thu Aug 06, 2020 8:15 pm

not sure if been posted before, tried to search but couldn't find any results.
would like add route to address on local LAN to my Mimosa dish, so i can access it.
local lan is on 192.168.0.XX and Mimosa is on 169.254.200.20.
mimosa is plugged into port 1(up link)

help would be appreciated
 
sindy
Forum Guru
Forum Guru
Posts: 10205
Joined: Mon Dec 04, 2017 9:19 pm

Re: route to CPE  [SOLVED]

Tue Aug 11, 2020 12:00 am

Add an IP address 169.254.0.1/16 to port 1 (or to the bridge of which it is a member) in parallel to the existing address, and add an action=masquerade rule to chain srcnat for dst-address=169.254.0.0/16. This should allow you to access the 169.254.200.20 from any device in your LAN, except if it itself has an address from 169.254.0.0/16.
 
User avatar
wynandZA
just joined
Topic Author
Posts: 6
Joined: Thu Aug 06, 2020 8:06 pm
Location: Cape Town

Re: route to CPE

Tue Aug 11, 2020 3:32 pm

ah, thank you.
will try that.
 
User avatar
wynandZA
just joined
Topic Author
Posts: 6
Joined: Thu Aug 06, 2020 8:06 pm
Location: Cape Town

Re: route to CPE

Wed May 12, 2021 7:05 pm

hi there.
finally had some time to actually sit down and set it up.

can access the Mimosa trough my phone, no problem
but trough my pc, i cant, keeps timing out, using CMD also says unreachable

Who is online

Users browsing this forum: baragoon, Google [Bot], rplant, Shylie and 75 guests