Hi,
This is my setup:
CCR1009- LHG5AC-XL<----->LHG5AC-XL - Powerbox Pro
Both LHG5AC-XL's are setup in bridge mode, running nv2 AC only. I have a /29 setup across the 4 devices.
Problem is we getting poor performance on single TCP connections over the link. Below all tested are on a single TCP connection using bandwidth test on the router both direction tested seperately.
From CCR1009 to the 1st LHG5= full speeds ( 250Mbps+ total incl normal net traffic, 500Mbps+ on 20 connection count) ( I only let it run for a few seconds to prevent impact on my clients)
From CCR1009 to the 2nd LHG5 over the wireless link= full speeds ( 50-60Mbps above current traffic load, 120-140Mbps total) ( I only let it run for a few seconds to prevent impact on my clients)
From CCR1009 to the Powerbox Pro= 30Mbps max, average 10-15Mbps. Then any further down from the Powerbox Pro to the other routers connected to it I get less than 10Mbps average.
From 2nd LHGXL to powerbox via network cable = 100-120Mbps single, connection count at 20 I still only get max 250Mbps
We have replaced the Powerbox already but have not replaced the LHG yet. LHG running latest firmware, powerbox running 6.46.6( to be upgraded this evening.)
Is this a bridging issue on the LHGXL on the powerbox side or problem on the network cable maybe?