, I found that out!You can make whole new MT unit for the price of one such miltiport LAN card
unfortunately, most of them charge 3 times the cost to ship to Australia. Some of them do not ship out of the States.ebay is your freind...
Craig
I completely disagree with this solution because this kind of routers are too expensive (>400 euros) and one of VLAN problem is exactly the use of a switch. Only a few swithes support VLANs correctly.Or use VLANs and one of these:
(managed ethernet switch) to get you to 25 ports.
D-Link 580 adapters are crap, they have been mentioned a number of times on these forums. If you get one, enjoy your reboots.
To winxp2000 - in this forum your picture gallery should start with Mikrotik products :
http://www.routerboard.com/rb44.html
It's more than the mentioned 100mbit cards can do anyway.To winxp2000 - in this forum your picture gallery should start with Mikrotik products :
http://www.routerboard.com/rb44.html
Hi you see
The RB44G use the PCI interface to setup a 4 ports NIC to a 4G?
PCI slot just 32bit and it supports 33MHz only
So, it's speed is 133MB/s(33MHz X 32bit/8).
Do you believe it?