I am getting DSL Subscribers on one Port.
Traffic from one DSLAM is tagged with a S VLan Tag like VLAN ID 10
Customer VLANs 4 VLANS per CPE are C VLAN 8,9,10,11
If more clients come on same DSLAM every client gets 4 C VLAN ids within S VLAN Tag 10.
If a client comes from an other DSLAM that DSLAM gets next S VLAN Tag 11 and so on.
But inside the S VLAN client C VLANS also start with C VLAN Tag 8,9,10,11.
I wonder how to setup it in best way. I was thinking about a bridge using Vlan filtering.
On the end i would like to send Layer 2 Traffic out of a C VLAN Tag depending on the Vlan to a DHCP Server and or to our PPOE Server.
Like C-VLAN 8 gets translated to a S VLAN let’s say VLAN 6 wich is connected to our PPOE Server or DHCP Server to get to internet.
Equipment i could use: CRS317-1G-16S+RM or CCR2004-1G-12S+2XS