Community discussions

MikroTik App
 
jayson
just joined
Topic Author
Posts: 2
Joined: Wed Aug 30, 2006 7:00 pm

nth error in 2.9.44 but not in 2.9.43

Mon Jul 09, 2007 11:30 pm

I was trying the improved load balancing over multiple gateways and found that ros 2.9.44
won't accept nth=

I used
[admin@MNS] ip firewall mangle> add chain=prerouting in-interface=Local connection-state=new nth=1,1,0
invalid value for counter, an integer required

where as this works on 2.9.43
and if I add this through winbox then do a print I get

[admin@MNS] ip firewall mangle> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=prerouting action=accept connection-state=new in-interface=Local nth=11,0

if I try add this with nth=11,0 I still get an error

Regards Jayson
 
sten
Forum Veteran
Forum Veteran
Posts: 919
Joined: Tue Jun 01, 2004 12:10 pm

Re: nth error in 2.9.44 but not in 2.9.43

Tue Jul 24, 2007 10:46 pm

Send this to support@
There has been numerous similar issues throughout times. I guess it's a mishap when they consolidate code (code reuse).

Who is online

Users browsing this forum: Amazon [Bot], Bing [Bot], duquesnoyinfo, GoogleOther [Bot], jaclaz, Javokhir, qatar2022 and 216 guests