Community discussions

MUM Europe 2020
 
joie
newbie
Topic Author
Posts: 46
Joined: Tue May 22, 2007 10:49 pm

PPPoE MTU Problem

Thu Jul 12, 2007 11:12 pm

About 2 months ago I was testing using a MiniRouter as a PPPoE client and either on the forum or in the wiki there was an entry for fixing the MTU issue where certain websites wouldn't open but after searching for a while now I can't find the post anymore, and I seem to have misplaced the printout's I made so I'd have it.

I tried ip firewall mangle add out-interface=pppoe-out protocol=tcp tcp-flags=syn action=change-mss new-mss=1300 chain=forward but that didn't work, the only thing I remember is the original mangle I had that worked was two seperate entries but I can't for the life of me remember what they were.

Any ideas?
 
User avatar
airstream
Member Candidate
Member Candidate
Posts: 188
Joined: Fri Feb 03, 2006 6:33 am
Location: New Zealand

Re: PPPoE MTU Problem

Wed Jul 25, 2007 2:50 am

In winbox you can set the MTU of the PPPoE client.

Common MTU's are:
1492
1488
 
abab_rafiq
Member Candidate
Member Candidate
Posts: 120
Joined: Thu Aug 24, 2006 12:47 pm
Location: Dhaka

Re: PPPoE MTU Problem

Wed Jul 25, 2007 6:07 pm

You can add a firewall mangle here with TCP-MSS of 1400, I got good result with it.
add chain=forward p2p=all-p2p action=jump jump-target=p2p

Rafiq...

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], HWTest, MSN [Bot], pe1chl and 156 guests