Hi All!

i am new to mikrotik i had a CCR1036-12G-4S which is our gateway to ISP eth1 is wan interface eth2 is LAn interface i have created two vlans 10 for DATA ,20 For voice also DHCP for each Vlan and assign it to eth2 , default route for both networks to the internet , nat .
the configuration should be right , the other side cisco switch sg350 interface with mikrotik is switch port mode trunk , and the IP phone port is switch port trunk native vlan 10, switch port trunk allowed vlan 20 but phones are not getting IP from DHCP ,and not all devices getting data vlan IP , any suggestion or hints .


Thanks