Hello to everyone,
i tried the search function but didn't find anything usuable...
We have following configuration up and working fine:
Router OS 2.9.44 on an PC with 2 Ethernet interfaces.
ether1 connected to a dsl router,
ether2 connected to internal net.
Our internal net is covering a wide area with mainly RB532 units.
For that we built up EoIP tunnels from AP to the router over a routed bachhaul.
On the router, we built up a bridge with the EoIP tunnels and the ether2 inside.
The IP address is bound to the ether2 interface.
Right now, we have 3 tunnels in the bridge and everything works fine with very low latency.
Yesterday i tried to add a new EoIP tunnel to the bridge. After adding the tunnel to the bridge, the router stopped.
A view on the console showing that the router is stopped with a kernelpanic and started to reboot. Every time it comes up, the failure occures again and again - alsways rebooting the device.
I extracted the ethernet cards from the device and was after that able to logon.
After removing the new tunnle from the bridge, everything works fine again.
Has anybody a idea for that issue?
Thanks in advance!