Hello Guys,
I want to manage the RBM33G router via IPSEC. I am using LTE as a wan.
I am sending all the management data over IPSec . I am able to achieve everything but the only issue is my net flow tool is showing RX traffic only.
I am also able to ping my net flow target IP via ipsec
Below is the config
/ip ipsec policy
add dst-address=0.0.0.0/0 peer="IPSEC PEER " sa-dst-address=x.x.x.x sa-src-address=25.132.51.52 src-address=\
192.168.9.0/29 tunnel=yes
/ip address
add address=192.168.9.1/29 interface="Management LAN" network=192.168.9.0
/ip route
add distance=1 dst-address=221.171.89.112/32 gateway=lte1 pref-src=192.168.9.1
/ip traffic-flow
set enabled=yes
/ip traffic-flow target
add dst-address=221.171.89.112
/ip traffic-flow print
enabled: yes
interfaces: all
cache-entries: 64k
active-flow-timeout: 30m
inactive-flow-timeout: 15s
> ping 221.171.89.112
SEQ HOST SIZE TTL TIME STATUS
0 221.171.89.112 56 62 51ms
1 221.171.89.112 56 62 46ms
2 221.171.89.112 56 62 67ms
3 221.171.89.112 56 62 48ms
sent=4 received=4 packet-loss=0% min-rtt=46ms avg-rtt=53ms max-rtt=67ms