I've been having lots of trouble setting up a hotspot with a wAP ac LTE6. Here's my routes:
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 A S 0.0.0.0/0 lte1 2
1 ADC 123.456.789.10/32 123.456.789.10 lte1 0
2 ADC 192.168.1.0/24 192.168.1.6 bridge 0
I also have a BCP L2TP/IPsec interface up and running that provides slight access to my main network. The problem is, I want to direct all traffic on the bridge, where the BCP is, through the L2TP interface which itself will be routed through LTE, instead of anything not targeting 192.168.1.xx going straight through the LTE. I tried adding the gateway IP on the main network as a route, but that messed everything up as it kept trying to push everything through that and so couldn't initiate the L2TP connection (a chicken-egg problem). II also tried adding the L2TP interface as a gateway and that didn't work either. Is there some special route rule I can add? Just so you know, the LTE interface is not on any bridge.