Wed Mar 31, 2021 10:37 pm
Hi there, on my home network I use a simple queue for QoS on a PPPoE connection that the MikroTik device establishes through a fiber internet terminal in bridge mode, and everything works as expected. However, I'm trying to help a friend with a similar configuration, except that he has to use the "Automatic" method for WAN address acquisition on the MikroTik. It doesn't matter in his case if LAN traffic is also limited to the same speed. The problem is that it's not limiting the speed. We set it to a max limit of 50M up/down and tried "bridge", "ether1" and "192.168.1.0/24" for the target. I confirm that fasttrack is disabled in the firewall. Under the queues overview the icon reacts to network traffic and turns yellow and red. But it's not limiting it, it allows it to go well over 100M. Any idea what I'm doing wrong? Thanks!