Diagrams please, when you say "THAT NETWORK" it means nothing!!
Spell out the requirements more clearly as well.
Hi,
Thanks for the reply and sorry for the lack of info please see attached file of the diagram.
image1.JPG
I'm running 2 ISP for load balancing and my LAN setup via VLAN connection, I have this certain network that would like to be forwarded specifically to the ISP2 so what I did is to force this network-winbox traffic to work only to ISP2 but after doing that I can't ping the local gateway and make work the port forwarding..
I used mangle to force the network-winbox to run only via ISP2 and accesible to port 8080
btw here's my configuration on forcing the network-winbox to ISP2..
/ip firewall nat
add action=masquerade chain=srcnat comment="ISP1" disabled=yes out-interface="ether1<ISP1>" src-address=192.168.100.0/24
add action=masquerade chain=srcnat comment="ISP2" out-interface="ether2<ISP2>" src-address=192.168.100.0/24
add action=dst-nat chain=dstnat dst-port=8080 protocol=tcp to-addresses=192.168.100.10 to-ports=8291
/ip firewall mangle
add action=mark-routing chain=prerouting new-routing-mark=Force-Route-ISP2 passthrough=no src-address=192.168.100.0/24
/ip route
add check-gateway=ping distance=1 gateway=100.100.100.1 routing-mark=to-isp1
add check-gateway=ping distance=1 gateway=200.200.200.1 routing-mark=to-isp2
add comment="force route to isp2" distance=1 gateway=200.200.200.1 routing-mark=Force-Route-ISP2
add comment="default route gateway isp1" distance=1 gateway=100.100.100.1
add comment="default route gateway isp2" distance=1 gateway=200.200.200.1
You do not have the required permissions to view the files attached to this post.