Community discussions

MikroTik App
 
xbar7networks
just joined
Topic Author
Posts: 9
Joined: Sun Feb 18, 2018 4:47 pm

LAG / portchannel / interface bonding between RouterOS and Ubiquiti Edgepoint-S16

Fri Apr 09, 2021 5:11 pm

Has anyone configured and used enough to confirm as stable LAG between a Mikrotik router (e.g. CCR series) and a Ubiquiti Edgpoint S16 switch?

AFAIK according to the docs (https://help.ui.com/hc/en-us/articles/3 ... Guide#3.14, https://wiki.mikrotik.com/wiki/Manual:Interface/Bonding) both devices support 802.3ad. I am planning to lab test this but before making my business dependent on it, I would like to ask if anyone in the WISP world has used this configuration enough to confirm it is reliable, any major issues to watch out for etc? I have used LAG / portchannel for many years in large Internet datacenter environments but the hardware in use was always Cisco and Juniper. I have no experience with LAG on either MT or Ubiquiti so any helpful pointers would be most welcome.

Thanks,

-scott

Who is online

Users browsing this forum: itamx and 76 guests