Hi, I have configured a RB2011 with 2 WAN and 2 LAN. Configuration below works fine. I also need to remote connect via winbox to RB2011. When i try to connect to public address doen't work. It does work only wiith 1 WAN but not with 2 WANs. What's wrong?
/ip firewall filter rules
add action=accept chain=input comment="Accetto traffico porta 8192" dst-port=8192 protocol=tcp
/ip firewall mangle
add action=mark-routing chain=prerouting new-routing-mark=LAN1_to_WAN1 passthrough=yes src-address=192.168.10.0/24
add action=mark-routing chain=prerouting new-routing-mark=LAN2_to_WAN2 passthrough=yes src-address=192.168.20.0/24
/ip firewall nat
add action=masquerade chain=srcnat comment=WAN1 out-interface=ether1-WAN1
add action=masquerade chain=srcnat comment=WAN2 out-interface=ether10-WAN2
/ip route
add distance=1 gateway=x.x.x.x routing-mark=LAN1_to_WAN1
add distance=1 gateway=y.y.y.y routing-mark=LAN2_to_WAN2