Hi, this is my problem... I have a bridged network (like image attached) where the PC can ping server, server can ping PC but when I try to have access to server it don't sees PC IP address but 2.4 GHz AP IP address... in other words, PC sees Server with right address (192.168.1.10) but Server sees PC with 192.168.1.103 IP address, not 192.168.1.200.
2.4 GHz AP have AP-Wlan card bridged with eth port and all wireless network are WDS bridged. If I try to connect PC directly to the station 2 via ethernet all work fine. 2.4 GHz AP have gateway (ADSL Router) configured and masquerade NAT is enabled. If masquerade is disabled all work fine but I need masquerade enabled for use internet via 2.4 GHz AP.