Community discussions

MikroTik App
 
DJSmiley
just joined
Topic Author
Posts: 18
Joined: Thu Feb 19, 2015 2:51 pm

Switch isolation settings missing in export

Thu Apr 15, 2021 10:32 am

Hello,

Device: CRS328-4C-20S-4S+RM

I did configure port isolation in my config,using switch - port isolation - enable forwarding override to the uplink port.

In Winbox this is displayed properly.

On the terminal, I can confgure/add these also using
/interface ethernet switch port-isolation
set 0 forwarding-override=sfp-sfpplus4

However, once entered, it does show up in Winbox, but with export I don't see these commands anymore

Tested both and 6.47.9 (long-term) and 6.48.2 (stable)
 
deafbear
just joined
Posts: 1
Joined: Mon Nov 01, 2021 9:38 am

Re: Switch isolation settings missing in export

Wed Nov 03, 2021 7:48 pm

Hello

The same to me, on CRS326-24G-2S+ with 6.49
Any solution?
Actually I use /interface ethernet switch port-isolation> export

Who is online

Users browsing this forum: Bing [Bot], giovanni, Google [Bot], qatar2022, sch and 97 guests