Community discussions

MikroTik App
 
michaels
just joined
Topic Author
Posts: 12
Joined: Fri May 17, 2019 8:02 pm

Is CRS3XX VLAN based Rate Limit implemented with shaper or policer?

Sat Apr 17, 2021 3:04 pm

I suspect shaper because it is egress traffic.
vlan-id rate limit should be as far as I know egress direction only.

Example Config
/interface ethernet switch rule
add ports=ether1 switch=switch1 vlan-id=123 rate=10M
Is rate=10M a policer or shaper?

For ingress traffic QoS policer is used, for egress traffic QoS shaper is used.
https://help.mikrotik.com/docs/display/ ... witch+Chip

Who is online

Users browsing this forum: Amazon [Bot], bertus, GoogleOther [Bot] and 106 guests