Sat May 15, 2021 7:06 pm
not similar..
My issue is , if a switch does have only vlan 10 and then how it will learn the mac of vlan 11,12,13 , How can i filter it in the trunk port of mikrotik ?
Any way ??
Find the config below..!!
/interface bridge
add name=SW-10 pvid=10 vlan-filtering=yes
/interface vlan
add interface=SW-10 name=vlan-10 vlan-id=10
add interface=SW-10 name=VLAN-63 vlan-id=63
add interface=SW-10 name=Vlan-61 vlan-id=61
/interface bridge port
add bridge=SW-10 interface=sfp-sfpplus2 pvid=10
add bridge=SW-10 frame-types=admit-only-vlan-tagged ingress-filtering=yes interface=sfp-sfpplus1 pvid=10
add bridge=SW-10 interface=sfp-sfpplus3
add bridge=SW-10 interface=sfp-sfpplus4
/interface bridge vlan
add bridge=SW-10 tagged=sfp-sfpplus1,sfp-sfpplus2 untagged=sfp-sfpplus3 vlan-ids=61
add bridge=SW-10 tagged=sfp-sfpplus1,sfp-sfpplus2 untagged=sfp-sfpplus4 vlan-ids=63
add bridge=SW-10 tagged=sfp-sfpplus1,sfp-sfpplus2,SW-10 vlan-ids=10