I have a strange problem with EoIP over ike2 VPN.
Everything works but when the main VPN server/router reboots the all the EoIP tunnel goes down.
EoIP doesn't come back until i change the tunnel ID on the main router and reboot the remote end routers, once vpn reconnects i can configure the EoIP tunnel ID to it original and it comes back online.
The vpn works great, i can always ping from one router to the other. Even if an EoIP tunnel is down.
I tried with different IP settings like disabling keepalive or changing the value, but doesn't work.
In the log off both routers i can't find anything use full and don't see an option to see more log output from EoIP
Setup: network 10.1.20.0/23 goes from the main router to the sub sites over EoIP tunnel.
There are currently 5 working EoIP tunnels but i'm counting at around 8 i will need in the end.
Main router / VPN Server
Mikrotik RB4011
ike2 vpn ip: 192.168.55.1
Code: Select all
/interface eoip
add allow-fast-path=no keepalive=2s,2 local-address=192.168.55.1 loop-protect=off mac-address=00:00:5E:80:0A:07 \
name=eoip-site7 remote-address=192.168.55.107 tunnel-id=107
Remote end (behind nat)
Mikrotik RB3011
ike2 vpn ip: 192.168.55.107
Code: Select all
/interface eoip
add allow-fast-path=no keepalive=2s,2 local-address=192.168.55.107 loop-protect=off mac-address=00:00:5E:80:0B:07 \
name=eoip-site7 remote-address=192.168.55.1 tunnel-id=107
Any thoughts on how to solve this?
Many Thanks!