Hi guys I have an rbm33g with two lte interfaces, I would to create a secondary gateway on the local network that will use the lte2 interface instead of lte1, i disabled default routes on both interfaces and I create static routes but i'm not able to do this.
I have brisged all lan ports, rbm33g local ip 192.168.0.1 => lte1
i would to create another gateway on the local network in order to insert it manually in the devices 192.168.0.2 => lte2
If this is not possible i would to specify in the router that all device goes to lte1 and only one device of the net will be redirected to lte2 but on the same ethernet (the rbm33g is on the roof with only poe cable)
Thanks in advance