Community discussions

MikroTik App
 
locki
just joined
Topic Author
Posts: 11
Joined: Sun Dec 16, 2012 6:23 pm

VRRP still invalid ip address

Tue Jun 01, 2021 10:47 pm

Hello,
i have interesting problem and i googled and read all about it ... setup done followed by manual and examples:
https://wiki.mikrotik.com/wiki/Manual:I ... /VRRP#IPv4
https://wiki.mikrotik.com/wiki/Manual:VRRP-examples

But still something missing... my configuration: two CCR1072-1-8S+ on 6.45.9 connected via switch via bonding interface:
[b]R01[/b]
Flags: X - disabled, I - invalid, D - dynamic 
 #   ADDRESS            NETWORK         INTERFACE                                                                                                                                                             
10   172.25.20.169/32   172.25.20.169   vrrp10                                                                                   
11   172.25.20.173/29   172.25.20.168   vlan2045  


/interface vrrp
add interface=vlan2045 name=vrrp10 priority=25 vrid=57

-----------------------------------------------------------------------------------

[b]R02[/b]
/ip address> print 
Flags: X - disabled, I - invalid, D - dynamic
 #   ADDRESS            NETWORK         INTERFACE                                
12 I 172.25.20.169/32   172.25.20.169   vrrp10                                   
13   172.25.20.174/29   172.25.20.168   vlan2045  

/interface vrrp
add interface=vlan2045 name=vrrp10 priority=15 vrid=57
Image

Can some master help what i have wrong there?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 7038
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: VRRP still invalid ip address

Wed Jun 02, 2021 1:05 am

Obviously R01 is a master and only on the master router IP will be active.
 
locki
just joined
Topic Author
Posts: 11
Joined: Sun Dec 16, 2012 6:23 pm

Re: VRRP still invalid ip address

Wed Jun 02, 2021 9:47 am

It is normal behaviour when R02 in slave still have invalid vrrp ip adress?
[b]R02[/b]
/ip address> print 
Flags: X - disabled, I - invalid, D - dynamic
 #   ADDRESS            NETWORK         INTERFACE                                
12 I 172.25.20.169/32   172.25.20.169   vrrp10                                   
13   172.25.20.174/29   172.25.20.168   vlan2045  
 
marypoppins
newbie
Posts: 30
Joined: Wed Nov 27, 2019 3:38 pm

Re: VRRP still invalid ip address

Wed Jun 02, 2021 12:42 pm

"It is normal behaviour when R02 in slave still have invalid vrrp ip adress?"
Yes, it is for a backup. If it wouldn't be invalid, then there will be two identical ip address on your network. If backup will be promoted to master, the ip will change from invalid to valid.

Who is online

Users browsing this forum: aoravent, Google [Bot], loloski, Lumpy and 99 guests