Community discussions

MikroTik App
 
GiovanniG
Member
Member
Topic Author
Posts: 338
Joined: Sun Nov 15, 2015 4:12 pm

Can't enable both 2.4 and 5GHz with CAPS

Tue Jun 08, 2021 1:11 pm

HI, that's a strange problem, configuration is done, both frequencies work with CAPS but not together,
when I press the CAP putton under wireless interface it impose me to choose which interface, and I can't select both of them. Conseguentely I can see on CAPSman only the 2.4 (if I choose wlan1) or 5GHz, and on my phone as well the SSID corresponding. Why I have this problem?

This is a RBD52G-5HacD2HnD with 6.47.10

Image
 
GiovanniG
Member
Member
Topic Author
Posts: 338
Joined: Sun Nov 15, 2015 4:12 pm

Re: Can't enable both 2.4 and 5GHz with CAPS

Tue Jun 08, 2021 1:17 pm

Another question, configuring CAPSman on 5GHz ch there are much less parameters available than configuring it directly on AP.
Image
 
erlinden
Forum Guru
Forum Guru
Posts: 1900
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: Can't enable both 2.4 and 5GHz with CAPS

Tue Jun 08, 2021 1:19 pm

Did you configure the CAP manually to become a CAP?
Instead of using (tiny) screenshots, can you please post the /export of the CAP?

Regarding the parameters...that is correct. But...which one are you (really) missing?
Last edited by erlinden on Wed Jun 09, 2021 12:43 pm, edited 1 time in total.
 
prawira
Trainer
Trainer
Posts: 357
Joined: Fri Feb 10, 2006 5:11 am

Re: Can't enable both 2.4 and 5GHz with CAPS

Wed Jun 09, 2021 5:20 am

try this on console
/interface wireless cap set discovery-interfaces=ether1 enabled=yes interfaces=wlan1,wlan2

capsman dedicated for indoor enterprise wireless, so no options for station, station-bridge, nv2, nstream, wds, etc. the other setting are the same.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11968
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: Can't enable both 2.4 and 5GHz with CAPS

Wed Jun 09, 2021 12:38 pm

HI, that's a strange problem, configuration is done, both frequencies work with CAPS but not together,
when I press the CAP putton under wireless interface it impose me to choose which interface, and I can't select both of them. Conseguentely I can see on CAPSman only the 2.4 (if I choose wlan1) or 5GHz, and on my phone as well the SSID corresponding. Why I have this problem?

This is a RBD52G-5HacD2HnD with 6.47.10

Image
Non si vede un cazzo nello screenshot, va "interpretato"
con le freccette in fondo dove si seleziona l'interfaccia wlan1 si possono aggiungere altre righe per mettere anche la seconda interfaccia
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11968
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: Can't enable both 2.4 and 5GHz with CAPS

Wed Jun 09, 2021 12:39 pm

Another question, configuring CAPSman on 5GHz ch there are much less parameters available than configuring it directly on AP.
Image
E' normale, i parametri sono distribuiti tra tutte le schede del cap

Who is online

Users browsing this forum: almdandi, Bing [Bot], korg and 81 guests