Community discussions

MikroTik App
 
pr3dict
just joined
Topic Author
Posts: 9
Joined: Sat Jun 19, 2021 5:35 pm

LTE Passthrough FAQ questions

Sat Jun 19, 2021 6:44 pm

To configure the Passthrough on ether1:
[admin@MikroTik] > /interface lte apn add apn=apn1 passthrough-interface=ether1
[admin@MikroTik] > /interface lte set lte1 apn-profiles=apn1
^^^ apn1? Isnt that already added as "default"?

This is what I have already
admin@MikroTik] > /interface lte apn print    
Flags: * - default 
 0 * name="default" apn="broadband" use-peer-dns=yes add-default-route=yes 
     default-route-distance=2 
Should I be adding this again? Or is the author just using apn1 as a placeholder?

To configure the Passthrough on ether1 host 00:0C:42:03:06:AB:
[admin@MikroTik] > /interface lte apn add apn=apn1 passthrough-interface=ether1 passthrough-mac=00:0C:42:03:06:AB
[admin@MikroTik] > /interface lte set lte1 apn-profiles=apn1
Same goes for this. Is that mac the new passthrough host, aka where the passthrough is headed to or is this the interface mac of the mikrotik ether1? Need more clarification.

Who is online

Users browsing this forum: Briancer, Google [Bot], GoogleOther [Bot], lurker888 and 54 guests