Hello,
is there any reason why it is not possible to filter IPv6 routes based on dst-address ?
> ipv6 route print where dst-address=2001:4860::/32
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, o - ospf, b - bgp, U - unreachable
# DST-ADDRESS GATEWAY DISTANCE
0 ADb 2001:4860::/32 fe80::f6b5:2fff:fe79:... 15
1 Db 2001:4860::/32 fe80::f6b5:2fff:fe79:... 15
2 Db 2001:4860::/32 fe80::f6b5:2fff:fe79:... 15
3 Db 2001:4860::/32 fe80::21d:b5ff:feca:5... 15
4 Db 2001:4860::/32 fe80::21d:b5ff:feca:5... 15
5 Db 2001:4860::/32 fe80::290:69ff:fe7f:7... 20
6 Db 2001:4860::/32 fe80::b602:16ff:fe55:... 20
7 Db 2001:4860::/32 fe80::bac2:53ff:fe1d:... 20