Community discussions

MikroTik App
 
jmginer
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Tue Dec 11, 2012 4:56 am
Contact:

ipv6 route filter by dst-address

Sun Jun 20, 2021 11:34 am

Hello,

is there any reason why it is not possible to filter IPv6 routes based on dst-address ?

Image
 
jmginer
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Tue Dec 11, 2012 4:56 am
Contact:

Re: ipv6 route filter by dst-address

Sun Jun 20, 2021 4:08 pm

On the other hand, via terminal it works but the gateway values are cut off and it is impossible to find out the interface of each route.

It is impossible to debug IPv6 routing.
> ipv6 route print where dst-address=2001:4860::/32    
Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, o - ospf, b - bgp, U - unreachable 
 #      DST-ADDRESS              GATEWAY                  DISTANCE
 0 ADb  2001:4860::/32           fe80::f6b5:2fff:fe79:...       15
 1  Db  2001:4860::/32           fe80::f6b5:2fff:fe79:...       15
 2  Db  2001:4860::/32           fe80::f6b5:2fff:fe79:...       15
 3  Db  2001:4860::/32           fe80::21d:b5ff:feca:5...       15
 4  Db  2001:4860::/32           fe80::21d:b5ff:feca:5...       15
 5  Db  2001:4860::/32           fe80::290:69ff:fe7f:7...       20
 6  Db  2001:4860::/32           fe80::b602:16ff:fe55:...       20
 7  Db  2001:4860::/32           fe80::bac2:53ff:fe1d:...       20

Who is online

Users browsing this forum: Google [Bot], Husky and 70 guests