Community discussions

MikroTik App
 
sunilkumar2
just joined
Topic Author
Posts: 1
Joined: Mon Jun 21, 2021 5:49 am

DSCP to dot1q mapping in Bridge

Mon Jun 21, 2021 6:35 am

Hello,

There Is one switch CSR226 running on v6.41.3.

Traffic with DSCP 46 entering in Ether 17 Interface and getting tagged with inner vlan on the basis of the destination mac-add associated with the interfaces (iVlan1,2,,,,,200). and traffic is further QinQ for the external Vlan 500. finally traffic double tagged is going out by bond3 (sfp-sfpplus1) interface.

Requirement: traffic coming with dscp 46 should be marked dot1p 5 value when going out on the bond3/sfp-sfpplus1 interface.

Please provide the configuration if it possible in the bridge case.
Here is the attached topology.
Topology.JPG

Thanks
Sunil
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 64 guests