Hello,
I have two routers, R1 and R2, connected via SSTP as per the following diagram.
R1 has a switch connected, and on that switch are servers with IPs in the 10.0.0.0/24 subnet.
R2 has a switch connected with servers in the 10.10.1.0/24 subnet, as well as two other routers, R3 & R4 with IP 10.10.1.240 and .241 respectively.
The interfaces on which the switch and two routers are connected are setup as a bridge.
I have created the necessary static routes in R1 and R2, so that the two subnets can communicate over the SSTP tunnel.
Now, the problem is that I can not reach the R3 & R4 from the other side of the tunnel.
Ping from R2 to R3 & R4 & vice versa works fine.
Ping from R3 & R4 to servers at 10.10.1.0/24 works fine.
Ping from R2 to servers at 10.10.1.0/24 works fine.
Ping from R1 to R2 works fine.
Ping from R1 to servers at 10.10.1.0/24 works fine.
Ping from servers at 10.0.0.0/24 to servers at 10.10.1.0/24 works fine.
Ping from R1 to R3 & R4 does not work.
Ping from servers at 10.0.0.0/24 to R3 & R4 does not work.
Any ideas?