Community discussions

MikroTik App
 
jjtag2301
just joined
Topic Author
Posts: 3
Joined: Thu Dec 28, 2017 6:46 pm

Problema Servidor dns y mikrotik / Problem Server dns and mikrotik

Sat Jun 26, 2021 12:02 am

En español

Buenas tardes, tengo un problema con 2 servidores dns, agregados al mikrotik...

Toda mi red esta ruteada, para ser especificos, ruteo estatico, tengo como router de servicio....

1 4011
1 CCR1036
y tengo un CCR1072, como BGP y administracion de clientes...

en el CCR1072, tengo un dedicado que recibo con fibra, y en ese dedicado esta el BGP con mi ASN..

antes de poner mi ccr1036 y mi 4011 con otros 2 proveedores, el servidor dns funcionaba bien
....

En el CCR1072 tengo alrededor de 15 segmentos de red, ya que manejo diferentes segmentos con diferentes VLAN..

supongamos que mi servidor dns tiene la ip... 10.10.10.2 y sale por el proveedor con el BGP, y tengo 2 segmentos supongamos 10.10.11.0 y 10.10.12.0, y salen por el mismo BGP, estos 2 segmentos si navegan sin problema alguno...

pero los segmentos de la 10.10.13.0 al 10.10.20, salen por el CCR1036 que es otro el proveedor, estos segmentos no navegan, pero si un cliente de la 10.10.13.0 lo paso a la 10.10.11.0, este cliente si navega... en ningun RB hago nat..

Este es el problema que tengo... osea los segmentos que salen por el BGP, si tienen internet, mientras que los que salen por los otros proveedores, no tienen internet..

En Ingles

Good afternoon, I have a problem with 2 dns servers, added to the mikrotik ...

My entire network is routed, to be specific, static routing, I have as a service router ...

1 4011
1 CCR1036
and I have a CCR1072, like BGP and client administration ...

In the CCR1072, I have a dedicated one that I receive with fiber, and in that dedicated one is the BGP with my ASN ..

before putting my ccr1036 and my 4011 with 2 other providers, the dns server was working fine
....

In the CCR1072 I have around 15 network segments, since I handle different segments with different VLANs ..

suppose that my dns server has the ip ... 10.10.10.2 and it goes out through the provider with the BGP, and I have 2 segments suppose 10.10.11.0 and 10.10.12.0, and they go out through the same BGP, these 2 segments if they navigate without problem any...

but the segments from 10.10.13.0 to 10.10.20, leave through CCR1036, which is another provider, these segments do not navigate, but if a client of 10.10.13.0 passed it to 10.10.11.0, this client does navigate. .. in no RB I do nat ..

This is the problem I have ... that is, the segments that go out through BGP, if they have internet, while those that go out through other providers, do not have internet.

Who is online

Users browsing this forum: akakua, anav, Bing [Bot], ItchyAnkle, Lumpy, menyarito and 88 guests