I was wondering how I would go about setting up my network to allow me to connect to my domain (which points to my public IP) to access a webserver on the same network. Any help would be appreciated. Here is the output of /ip firewall nat print
Code: Select all
> /ip firewall nat print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade out-interface=ether1
1 X ;;; https,http
chain=dstnat action=dst-nat to-addresses=192.168.200.104 protocol=tcp
dst-address-type=local dst-port=443,80 dst-limit=1,5,dst-address/1m40s
log=no log-prefix=""