Hi!
Would it be possible to enhance the loop protect feature to be able to use it as a ring topology redundancy function? Today sending interval is 5s at lowest, way to high to make a ring break/connect almost "seamless". It would be great if this setting could be set to 0 meaning it will send a new loop protect packet as soon as the previous one made it back.
And there would probably need to be a timeout in milliseconds to wait before triggering a break (and starts forward on both ports).
Second, the disable time would also need to be disabled completely. 0 now means "disable indefinitely" which is the opposite needed here as a loop (ring) would be more like the normal state.
CPU usage should not be a issue as I'm thinking the device would probably be dedicated for this ring redundancy role anyway if used as such.
These kinds of "basic" rings is often used in industrial systems for redundancy. Advantages over *STP is of course fail over speed in ms rather than seconds making a ring break almost unnoticeable for the time critical control systems. *STP is also not implemented in all industrial dual port devices. There are already several proprietary ways of doing this on other brands, for example hirschmann HiPER ring which works similar to loop protect by sending a control packet around in the ring.
Kind regards
David