Community discussions

MikroTik App
 
lechat75
just joined
Topic Author
Posts: 24
Joined: Sun Jun 21, 2020 12:24 pm

VLAN Translation

Thu Jul 08, 2021 11:28 pm

Hello,
I need to set up VLAN translation, VLAN 1 included from Cisco switch.
On the CRS326, I was unable to do this setup.
Does this mean 3xx series can't do translation ?
Maybe I have to switch from ROS to SwOS ?

Thanks for help !

Emmanuel
 
mducharme
Trainer
Trainer
Posts: 1777
Joined: Tue Jul 19, 2016 6:45 pm
Location: Vancouver, BC, Canada

Re: VLAN Translation

Thu Jul 08, 2021 11:45 pm

I need to set up VLAN translation, VLAN 1 included from Cisco switch.
SwOS has fewer features than RouterOS so probably SwOS won't help you.

You can try doing some things in the "Rule" tab of the "Switch" menu. I know that can be used to change a VLAN tag so it might be possible to use switch rules for translation.
 
User avatar
k6ccc
Forum Guru
Forum Guru
Posts: 1490
Joined: Fri May 13, 2016 12:01 am
Location: Glendora, CA, USA (near Los Angeles)
Contact:

Re: VLAN Translation

Fri Jul 09, 2021 2:11 am

Never tried it, but you likely could have one port that has VLAN 1 as untagged and another port that has the other desired VLAN as untagged. Then run a cable between the two ports. I have never tried that, but I have heard of that being done.
 
lechat75
just joined
Topic Author
Posts: 24
Joined: Sun Jun 21, 2020 12:24 pm

Re: VLAN Translation

Sat Jul 10, 2021 1:41 am

Yop,

yes it works.!

The configuration need to be two ways in Rules

I notice there is no way to rewrite the same VLAN on several destination ports

https://wiki.mikrotik.com/wiki/Manual:C ... ranslation

Thank you

Who is online

Users browsing this forum: aboshhab and 37 guests