Thu Jul 22, 2021 5:11 pm
Yes, pretty much that setup. In my case, I had a few ports that I wanted to be hybrid with some tagged VLANs and a PVID.
For config, all ports, including the SFP were put into a bridge with VLAN filtering disabled. Then switch config looked like this.
/interface ethernet switch port
set 1 default-vlan-id=243 vlan-mode=secure
set 2 default-vlan-id=24 vlan-mode=secure
set 3 default-vlan-id=24 vlan-mode=secure
set 4 default-vlan-id=246 vlan-mode=secure
set 5 vlan-mode=secure
/interface ethernet switch vlan
add independent-learning=no ports=ether5,switch1-cpu switch=switch1 vlan-id=2015
add independent-learning=no ports=ether5,switch1-cpu switch=switch1 vlan-id=246
add independent-learning=no ports=ether5,switch1-cpu switch=switch1 vlan-id=2017
add independent-learning=no ports=ether2,switch1-cpu switch=switch1 vlan-id=2016
add independent-learning=no ports=ether2,switch1-cpu switch=switch1 vlan-id=243
add independent-learning=no ports=ether3,ether4,switch1-cpu switch=switch1 vlan-id=24
add independent-learning=no ports=ether3,switch1-cpu switch=switch1 vlan-id=31