Hi Guys,
Note: ISP1 10mbps
ISP2 5mbps
Just need a little help, I am newbie here, anyone tried to used Dual Wan With Load Balance. fail over and Merge bandwidth?
Observe: Smooth as a 99% working for me together with 2 ISP merge bandwidth using "Bridge-LAN" in Bridge in our LAN clients.
Problem: if i used other Bridge like Named "PPPOE", the said PPPOE client can't worked with 2 ISP merge but it has a internet.
Please see picture below for reference also my script.
Here's is the proof that 2 isp merge is working as you can see both ISP (ISP1 and ISP2) working together at a time. this was i am using Bridge-LAN at a Bridge. this also tried to a download a file,
This was i am using PPPoE at Bridge. as you can see, only 1 ISP is working at a time if i tried to download a file.
Here is my script.
/ip firewall mangle
add chain=prerouting dst-address-type=!local in-interface=Bridge-LAN per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=ISP1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=Bridge-LAN per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=ISP2_conn passthrough=yes
add chain=prerouting connection-mark=ISP1_conn in-interface=Bridge-LAN action=mark-routing new-routing-mark=to_ISP1
add chain=prerouting connection-mark=ISP2_conn in-interface=Bridge-LAN action=mark-routing new-routing-mark=to_ISP2
add chain=prerouting dst-address-type=!local in-interface=PPPoE per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=ISP1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=PPPoE per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=ISP2_conn passthrough=yes
add chain=prerouting connection-mark=ISP1_conn in-interface=PPPoE action=mark-routing new-routing-mark=to_ISP1
add chain=prerouting connection-mark=ISP2_conn in-interface=PPPoE action=mark-routing new-routing-mark=to_ISP2
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.5.1%pppoe-out1 routing-mark=to_ISP1 check-gateway=ping com=pppoe-out1
add dst-address=0.0.0.0/0 gateway=10.10.9.1%pppoe-out2 routing-mark=to_ISP2 check-gateway=ping com=pppoe-out2
add dst-address=0.0.0.0/0 gateway=192.168.5.1%pppoe-out1 distance=1 check-gateway=ping com=pppoe-out1
add dst-address=0.0.0.0/0 gateway=10.10.9.1%pppoe-out2 distance=2 check-gateway=ping com=pppoe-out2