I have a Mikrotik RB912UAG-2HPnD connected to a simple switch connected to a fortigate (as a defualt gateway).
work without a problem , but I noticed that the max download speed is ~ 10Mbps . (even when I the device is 1 meter from the router and the signal is -45~ )
up until now my WiFi had this setup:
Code: Select all
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n disabled=no frequency=2452 installation=indoor \
mode=ap-bridge radio-name=Office rx-chains=0,1 security-profile=OfficePassword ssid="MYWiFi " \
tx-chains=0,1 tx-power=15 tx-power-mode=all-rates-fixed wireless-protocol=802.11 wps-mode=disabled
check the download speed and got 100Mbps
so I know there is no problem in the fortigate , or also in the mikrotik ( I ssume) .
the ethernet and the WiFi in the mikrotk are on a bridge
can it be the password type\setting?
Code: Select all
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=My-Router
add authentication-types=wpa2-psk,wpa2-eap group-ciphers=tkip management-protection=allowed mode=dynamic-keys \
name=OfficePassword supplicant-identity="" unicast-ciphers=tkip wpa2-pre-shared-key=P@ssw0rd!
I got ~ 40 MBPS
also when I try to change the WiFi to "Only-N" - I could see the netwrok in my phone , but was unable to connect to it .
using samsung phone S8\S10\S20
what could be the problem ?