I'm trying to do a simple trunk -> access port vlan split per https://wiki.mikrotik.com/wiki/Manual:I ... s_Ports.29 (really, combining examples 1 and 3); when I have vlan filtering off, the vlan ip addresses are pingable over the tagged uplink port, but not when vlan filtering is turned off. Initially, a client on one of the access ports could ping the router, but that seems to have stopped working (the router is not responding to arp requests, nor sending them out).
# feb/02/1970 20:32:01 by RouterOS 6.46.7
# software id = G0ZP-8CHD
#
# model = RB760iGS
# serial number = A51A0980D52F
/interface bridge
add name=uplink-bridge vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] comment="handoff 1" speed=100Mbps
set [ find default-name=ether2 ] comment="handoff 2" speed=100Mbps
set [ find default-name=ether3 ] speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] comment="Local access port" speed=100Mbps
set [ find default-name=sfp1 ] comment=uplink
/interface vlan
add interface=uplink-bridge name=vlan200 vlan-id=200
add interface=uplink-bridge name=vlan613 vlan-id=613
/interface bridge port
add bridge=uplink-bridge interface=ether1 pvid=200
add bridge=uplink-bridge interface=ether2 pvid=613
add bridge=uplink-bridge interface=sfp1
/interface bridge vlan
add bridge=uplink-bridge tagged=sfp1 untagged=ether1 vlan-ids=200
add bridge=uplink-bridge tagged=sfp1 untagged=ether2 vlan-ids=613
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether5 network=192.168.88.0
add address=207.55.110.1/30 interface=vlan200 network=207.55.110.0
add address=10.99.200.10/24 interface=vlan200 network=10.99.200.0
add address=10.99.113.10/24 interface=vlan613 network=10.99.113.0