Hi all
i please find my config hop this help. explain things
Adam
Config
# sep/14/2021 22:48:52 by RouterOS 6.48.4
# software id = PYY0-J8DC
#
# model = RBLtAP-2HnD
# serial number = B7270B37EDB8
/interface bridge
add admin-mac=C4:AD:34:70:B4:76 auto-mac=no comment=defconf name=bridge
/interface lte
set [ find ] allow-roaming=no band=3 name=lte1 network-mode=3g,lte
/interface vlan
add interface=ether1 name=vlan3LTE vlan-id=3
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface lte apn
set [ find default=yes ] apn=three.co.uk passthrough-interface=vlan3LTE \
passthrough-mac=auto
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk eap-methods="" mode=dynamic-keys \
name=Staff supplicant-identity=""
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
country="united kingdom" distance=indoors frequency=auto installation=\
outdoor mode=ap-bridge security-profile=Staff ssid=WC&CPWiFi-Staff \
wireless-protocol=802.11 wps-mode=disabled
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
/port
set 1 baud-rate=115200 name=gps
/interface bridge port
add bridge=bridge comment=defconf interface=ether1
add bridge=bridge comment=defconf interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=lte1 list=WAN
/ip address
add address=192.168.1.4/24 comment=defconf interface=bridge network=\
192.168.1.0
/ip dhcp-client
add disabled=no
/ip dns
set allow-remote-requests=yes servers=192.168.1.1,1.1.1.1
/ip dns static
add address=192.168.1.4 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ip upnp interfaces
add interface=bridge type=internal
add interface=lte1 type=external
/system clock
set time-zone-name=Europe/London
/system gps
set port=gps
/system leds
# using RSRP, modem-signal-threshold ignored
set 0 interface=lte1 type=modem-signal
/system routerboard settings
set auto-upgrade=yes
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
anynameyouwish.rsc
You do not have the required permissions to view the files attached to this post.