[Edit: please read carefully, I need additional hardware for testing and therefore I stop investigating]
Dear all,
I am migrating my home network with VLANs to a Mikrotik router and a Mikrotik switch :
CCR2004-1G-12S+2XS
CRS312-4C+8XG
My present setup has isolaged VLANs but some communication is allowed.
Each ethernet port is on a seperate VLAN to avoid data leak.
Sometimes I also allow a communication from VLAN-A to VLAN-B but the converse is not allowed.
Filtering is based on source IP range. For example this allow me to reach my printer on a separate VLAN but the printer cannot reach me.
All is done on the firewall.
I already replaced my old 1GB switch with a 10GB Mikrotik switch.
Now I need to replace the firewall (router).
How do I achieve inter VLAN filtering with a Mikrotik router?
Can it be done at wire speed?
Kind regards,
FF