My setup is as follows:
I have a CHR on a virtual machine with 2 public static IP addresses on the same interface (ether1)
Address1: 160.xxx.xxx.54/24
Address2: 160.xxx.xxx.55/24
Gateway: 160.xxx.xxx.1
I have setup l2tp and have 2 clients connected both on the same Mikrotik router (RB2011UiAS-RM):
Client1: local: 192.168.100.1 remote: 192.168.100.10
Client2: local: 192.168.101.1 remote: 192.168.101.10
I have 2 devices connected to the Mikrotik router:
Device1: interface: ether2, address: 192.168.88.254/24
Device2: interface: ether3, address: 192.168.88.253/24
My goal is to route traffic as follows
Code: Select all
192.168.88.253 -> 160.xxx.xxx.54
160.xxx.xxx.54 -> 192.168.88.253
192.168.88.254 -> 160.xxx.xxx.55
160.xxx.xxx.55 -> 192.168.88.254