I've been trying to get some traffic flow data on a MT running .11 using SNMP, and so far no luck. I get data...just a string of zeros. Using MIB of 1.3.6.1.2.1.2.2.1.10.5

By the way, MT 2.9b11 loaded on a routerboard very nicely...no issues so far.

I really like the new? Graphing in simple queues. I'm wondering if there is any examples existing of polling that information and sending it to Cricket or somesuch a website for user feeback/accounting on bandwidth consumption?

I don't get it,

installed two machines:
same config; same hardware; same os (2.9.11 Beta)

SNMP working fine on one on the other machine i only get 0 from every interface.

Still the same after i upgraded to beta12.

Is there somebody else who can confirm this problem ?

I just upgradied to 2.9 and I'm getting 0's
2.8 I was getting Info.

IF-MIB::ifName.1 = STRING: ether1
IF-MIB::ifName.2 = STRING: ether2
IF-MIB::ifName.4 = STRING: wlan1
IF-MIB::ifInMulticastPkts.1 = Counter32: 0
IF-MIB::ifInMulticastPkts.2 = Counter32: 0
IF-MIB::ifInMulticastPkts.4 = Counter32: 0
IF-MIB::ifInBroadcastPkts.1 = Counter32: 0
IF-MIB::ifInBroadcastPkts.2 = Counter32: 0
IF-MIB::ifInBroadcastPkts.4 = Counter32: 0
IF-MIB::ifOutMulticastPkts.1 = Counter32: 0
IF-MIB::ifOutMulticastPkts.2 = Counter32: 0
IF-MIB::ifOutMulticastPkts.4 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.1 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.2 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.4 = Counter32: 0
IF-MIB::ifHCInOctets.1 = Counter64: 0
IF-MIB::ifHCInOctets.2 = Counter64: 0
IF-MIB::ifHCInOctets.4 = Counter64: 0
IF-MIB::ifHCInUcastPkts.1 = Counter64: 0
IF-MIB::ifHCInUcastPkts.2 = Counter64: 0
IF-MIB::ifHCInUcastPkts.4 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.1 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.2 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.4 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.1 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.2 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.4 = Counter64: 0
IF-MIB::ifHCOutOctets.1 = Counter64: 0
IF-MIB::ifHCOutOctets.2 = Counter64: 0
IF-MIB::ifHCOutOctets.4 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.1 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.2 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.4 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.1 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.2 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.4 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.1 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.2 = Counter64: 0

since my upgrade to 2.9 on our test routers...
the interfaces just give zero's

cpu en mem are working fine

Today I contacted support via E-Mail let's see if they know a reason or better a sloution.

Today i recieved a mail from support:

Hello,

It is fixed in the latest beta release. Please upgrade.

Sincerely,
Eugene

Well, I still have the problem with Beta 14.
Anyone else experiencing this problem with Beta 14?

Yes. I'm using MRTG and up until loading 2.9 I was getting traffic data on the graphs. They're still at 0 even with beta 14.

Regards

Andrew

still zero's

latest version is beta 15

not available for public download ?!

not yet. you have to wait for the new version