Page 1 of 1

wireless problem in 3.0xx, low thruput, high latency

Posted: Sat Sep 08, 2007 10:17 pm
by moly
Hi, help me, i have RB532 and CM9 card as AP and clinet Ovislink WL-5460AP. In version 2.9.x its all great, high thruput and low latency. If upgrade to 3.0xx, all is bad. Thruput abou 700kbps and ping about 300 - 1500ms :( . The same problem with NTB HP compaq. I testing the new RB333 and its suport only 3.0xx and problem is the same, but no way to 2.9.xx :( . Siganl is good -60dB.
Pleas help me, is some bug in ROS or only configuratin problem?
Thanx

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Sat Sep 08, 2007 10:26 pm
by moly
Some screenshot, upset in registration table, and normal latenci in idle, no trafic. :(

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Sun Sep 09, 2007 6:53 pm
by changeip
which version of 3.0 are you using? I believe I read they fixed that in the latest RC.

Sam

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Sun Sep 09, 2007 8:02 pm
by moly
3.0rc4 on RB333

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Mon Sep 10, 2007 4:42 pm
by BrianHiggins
umm.. how does your wireless client have a mac address of 00:00:00:00:00?

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Mon Sep 10, 2007 4:54 pm
by moly
but, my clinet not have 00:00:00:00:..... Have real MAC 00:4F:62:....... , but in registration table is wrong, and also interface "unknown".

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Mon Sep 10, 2007 5:02 pm
by uldis
please make the support output file and send it to support@mikrotik.com

Re: wireless problem in 3.0xx, low thruput, high latency

Posted: Mon Sep 10, 2007 5:50 pm
by moly
ok, i send supout and mor info, thanx