Internet Connection1 = 188.8.131.52
Internet Connection2 = 184.108.40.206
IC1 and IC2 connect to AP1 via Ether1
If I assign the IP addresses to Ether1 I can ping the gateway no problem.
AP1 connects to AP2 by dynamic WDS. AP1 has ether1 and wlan1 bridged together.
Regardless of what I do I cannot assign the 220.127.116.11 address to AP2, I've tried all different interfaces i.e. wlan1, wds bridge, etc.
What am I doing wrong? I need AP1 to act as a simple bridge so that AP2 does all the client routing and I can have different gateways setup on AP2 and segment my network with different routing marks.