Setup:
Internet Connection1 = 12.104.120.200
Internet Connection2 = 12.120.120.200
IC1 and IC2 connect to AP1 via Ether1
If I assign the IP addresses to Ether1 I can ping the gateway no problem.
AP1 connects to AP2 by dynamic WDS. AP1 has ether1 and wlan1 bridged together.
Regardless of what I do I cannot assign the 12.104.120.200 address to AP2, I've tried all different interfaces i.e. wlan1, wds bridge, etc.
What am I doing wrong? I need AP1 to act as a simple bridge so that AP2 does all the client routing and I can have different gateways setup on AP2 and segment my network with different routing marks.