I'm trying to open port 80 and 443 to my small web server, yet if I do it in NAT section - I am unable to browse sites in my LAN
What could causing this issue ?
Code: Select all
/ip firewall nat> print
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; defconf: masquerade
chain=srcnat action=masquerade out-interface-list=WAN ipsec-policy=out,none
1 X ;;; Web Server .50:80
chain=dstnat action=dst-nat to-addresses=192.168.0.50 to-ports=80 protocol=tcp dst-port=80 log=no log-prefix="WEB SERVER >"
2 X ;;; Web Server .50:443
chain=dstnat action=dst-nat to-addresses=192.168.0.50 to-ports=443 protocol=tcp dst-port=443 log=no log-prefix="WEB SERVER 443"