Maximan - your comments interest me because we have two systems, with identical Simple Queues setup to capture P2P traffic. One is running v2.9.44, one is v3.0rc5.
We have only just started using QoS and I have found that the system running v3.0rc5 is not detecting any P2P traffic, however the one running v2.9.44 is doing a great job.
HOWEVER - I still need to examine more deeply the actual traffic content as it might be because there really IS no Peer to Peer traffic on our v3.0rc5 system.
The Simple Queue on v2.9.44 and v3.0rc5 are exactly the same (to the letter), as follows:
Flags: X - disabled, I - invalid, D - dynamic
0 name="p2p" target-addresses=0.0.0.0/0 dst-address=0.0.0.0/0 interface=Wireless_24 parent=none direction=both
priority=8 queue=default/default limit-at=128000/512000 max-limit=256000/1000000 total-queue=default
1 D name="<hotspot1>" dst-address=0.0.0.0/0 interface=Wireless_24 parent=none direction=both priority=8
queue=hotspot-default/hotspot-default limit-at=0/0 max-limit=0/0 total-queue=default-small
2 D name="<hotspot2>" dst-address=0.0.0.0/0 interface=Wireless_56 parent=none direction=both
priority=8 queue=hotspot-default/hotspot-default limit-at=0/0 max-limit=0/0 total-queue=default-small
If I look at the statistics tabs in winbox and the graphs, the v2.9.44 one is working very well, providing QoS but the v3.0rc5 is doing nothing with zero bytes showing in the statistics tab and a flat line in the p2p graph.
This is a graph from the working system....
and now one from the "non working"(?) v3.0rc5 system ...
Therefore, until I have analysed the traffic content flowing through the v3.0rc5 system, I can't really comment as to whether it is working or not, but thought the above info might be of use to someone anyway! On the other hand, apologies if it only muddies the waters.
You do not have the required permissions to view the files attached to this post.