I have tried to setup load balancing from the wiki, but it does not seem to want to work with my setup.
We have two adsl lines,
adsl line 1 ip address 192.168.1.254
adsl line 2 ip address 10.0.0.138
Both are from the same ISP each ADSL line has modem set to masquerade
ETH2 192.168.1.222 ETH3 10.0.0.1
ETH1 192.168.xx.xxx MIKROTIK ROUTER NEEDS LOAD BALANCE SETUP
If anyone could help with the load balancing on this (with or without failover) it would be greatly appreciated.