So we have 2 line
wan 1= 200M
wan 2=50MB

Traffic = 50% from wan1 and 50% from Wan2

Need Edit Rule to set load balance 70% from Wan 1 and 30 Form Wan 2

THANK

Current config

add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN_CON_1 passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/0 src-address=192.168.88.0/24

add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN_CON_2 passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/1 src-address=192.168.88.0/24

add action=mark-routing chain=prerouting connection-mark=WAN_CON_1 \
new-routing-mark=ROUTING1 passthrough=yes src-address=192.168.88.0/24

add action=mark-routing chain=prerouting connection-mark=WAN_CON_2 \
new-routing-mark=ROUTING2 passthrough=yes src-address=192.168.88.0/24

66% = 1/3->1 2/3->1 3/3->2

thats wrong bro
66% = 1/3->1 2/3->1 3/3->2

So good

why is 3/1 3/2 3/3
why not 3/0 3/1 3/2

can you help me to write the addistional rule i need

Even simpler: 1/3 goes to two and the rest goes to one.

You so only need one PCC line that marks traffic for routing2 and the rest you just mark for routing1 as long it is not marked earlier for routing2.

add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN_CON_2 passthrough=yes per-connection-classifier=\
both-addresses-and-ports:3/0 src-address=192.168.88.0/24

add action=mark-connection chain=prerouting dst-address-type=!local \
connection-mark=!WAN_CON_2 new-connection-mark=WAN_CON_1 \
passthrough=yes src-address=192.168.88.0/24

Bye

Wan1 5/0
Wan1 5/1
Wan1 5/2
Wan1 5/3
Wan2 5/4

Using PCC

@chechito: really? Secondly, that is 80:20

Simpler, 5/4 to Wan2 what is left to Wan1.
Do you now get, how it can work?

Bye

wich the correct answer??

You can be the judge on that.

Chechito had the right idea actually just didnt take it far enough.

WAN2 - 7/0
WAN2 - 7/1
WAN1 - 7/2
WAN1 - 7/3
WAN1 -7/4
WAN1 - 7/5
WAN1 - 7/6

To use Msatters cute but not fully explained shortcut..................

add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN_CON_2 passthrough=yes per-connection-classifier=\
both-addresses-and-ports:7/0 src-address=192.168.88.0/24

add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN_CON_2 passthrough=yes per-connection-classifier=\
both-addresses-and-ports:7/1 src-address=192.168.88.0/24

add action=mark-connection chain=prerouting dst-address-type=!local \
connection-mark=!WAN_CON_2 new-connection-mark=WAN_CON_1 \
passthrough=yes src-address=192.168.88.0/24