Dear all,
I start using PPPOE now after many problems when using hotspot and my question here about the configration of PPPOE I did'nt assign any IP for the Local interface and I make Pool for the PPPOE name it ( PPPOE pool ) starting from 10.10.10.2-10.10.10.254 and in PPPOE profile i set the Local address=PPPOE pool and the remote address=PPPOE pool and in ip firewall nat i make a rule srcnat and src.address is 10.10.10.0/24 and action=masqurade and in ip firewall mangle I set this rule for change MSS [ / ip firewall mangle
add chain=forward protocol=tcp tcp-flags=syn action=change-mss new-mss=1448 \
comment="" disabled=no

so please is there any wrong in my configration ?

In PPPoE Profile, set the Local Address to something static, like 10.10.10.1.
And in your NAT Rules, in your srcnat chain, you have to specify an Out-Interface (e.g. your WAN / internet connection.)

This connection's gateway must obviously be set up, and /ip/dns must be configured.

Hope that helps.
-K

ok but it is work with my configration and I can connect to internet but the important thing to me is my configration right or wrong ? and will my configration make many troubles in future ?

Your configuration should work perfectly fine.

Ask again if you run into trouble - Will be happy to help.

-K

Thanks alot krigevr I appreciate ur reply.but I'm worried cause I connect only my pc to this server by PPPOE and I dont know if i use it for my network for more than 300 user will work good or not ( you know if I have any misstake in my PPPOE config my phone will never stop ringing )

I'm serving about 80 clients with a configuration that is nearly identical to yours... Works fine. My phone rang off the hook when I first started using PPPoE... but it works MUCH better than the previous system I used. Clients are happy now.

What is the purpose of the change mss to 1448 ?

-Kreg

What is the purpose of the change mss to 1448 ?

-Kreg

I didnt change the mss to 1488 but everything is fine! i am serving about 170 users and noone call me about having problem. what will be if i didnt use?